The TriggerSmart is designed to easily capture images using many different ways to trigger a camera using Sound, Light Intensity Increase, Infra-Red Beam Breaking and Movement.
A unique motion capture system that is affordable. The smart way to trigger your camera using light, sound and motion. A great variety of stills and video cameras can be used, digital as well as film based cameras.
The TriggerSmart Kit contains the MCT-1 Controller, IR/LIS Receiver, IR Transmitter & Sound Sensor, two Mini Tripods, two control cables, one trigger cable and 2 degree baffle.
For some fantastic examples of images made possible by the TriggerSmart range please Click Here
Selectable for 5ms (1/200 sec.) to 5 seconds DELAY TIME:
Short delay 1ms (1/1000 sec.) to 100ms (1/10 sec.) - Long delay 1000ms (1/10 sec.) to 10 seconds.
Manual, auto 1 shot, auto re-arm.
Flash, infra-red beam, sound.
Range 20cm to 2m. Wavelength 850 nm.8 degrees or 2 degrees with focal baffle.
Range 1 to 1500 lumens. Sensitivity 10 lumens.
Microphone sensitivity frequency response 50 to 5000 Hz.
x3 open collector (x2 trigger, x1 focus). 50 v DC max at 100 milliamps.
x4 AA batteries, high power type, non-rechargeable - AC to low voltage PSU 6 to 9 VDC at 100 milliamps. MP1 Mains power unit recommended.
About 40 milliamps. When IR TX module is connected this rises to 80 milliamps.
Controller - (W)19cm x (D)14cm x (H)5cm Sensors (W)7.5cm x (D)5cm x (H)2.6cm.
1/4 inch UNC thread (standard tripod thread).
MINI TRIPOD HEIGHT:
8 cm min. 17 cm max.
MCT-1 Controller 325g. Sensors 43g. Tripods 33g. Kit 950g.
0 to 35 degrees C (operating). -10 to 50 degrees C (non-operating).
Connection to camera: Many cameras will connect to the TriggerSmart MCT-1 with the cable provided in the kit. Some cameras will need other dedicated cable connections. Please view the controller/camera connections and the cabling options documents for full details.
Please also see the instruction book and the Q+A sheet for further details, or contact us with any questions.
Download the full Triggersmart pricelist and Camera Trigger Adaptor list (both PDFs)
Triggersmart is made in the UK by Sabre Switch who can contacted for technical support on 0845 165 0351