Ray Flash Universal Ringflash Adaptor - Short Neck Version
**Camera and lens not included
The Ringflash Adapter is unique! It was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of internal prisms, reflectors and light-shapers to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered, i.e. have a cable from ringflash to power pack.
The Ringflash Adapter creates a very special lighting effect: a "3D shadow-wrapped look". Because all light originates from the front, i.e. from around the lens, it produces a virtually shadow-less look on the front of your subject, while a soft even shadow appears around the edges. It is ideally suited for fashion, portrait and beauty images as a main or fill-in light.
The Ringflash Adapter does not change the colour temperature of the flash unit and the additional weight can easily be accommodated by the on-camera flash unit.
Light output: The Universal Ringflash Adapter is very efficient and the loss of light is surprisingly low!
The UNIVERSAL Ringflash Adapter is made to fit all shoe-mounted flash units (speedlites) and almost all cameras! There are two models, which differ slightly in height to accommodate all DSLR cameras. Both models have a height-adjustable neck for minor variations in camera height.
RFU-S distance between optical axis and the middle of the flash units reflector is 160 -175 mm
RFU-L distance between optical axis and the middle of the flash units reflector is 175 -190mm
Both versions weigh 540g
|Modifier Type||Ringflash Adaptor|